Jauns Inter row cultivator Green Razor 8.4 m kultivators















Ja Jūs esat nolēmuši iegādāties tehniku par zemu cenu, pārliecinieties, ka sazināties ar reālo pārdevēju. Uzziniet pēc iespējas vairāk informācijas par tehnikas pārdevēju. Viens no krāpniecības veidiem - uzdot sevi par reāli eksistējošu kompāniju. Ja jums ir radušās šaubas, sazinieties ar mums papildus kontroles veikšanai, izmantojot atsauksmju formu.
Pirms jūs izlemjat veikt pirkumu, uzmanīgi izskatiet vairākus pardošanas piedāvājumus, lai saprast vidējo cenu jūsu izvēlētajam tehnikas modelim. Ja piedāvājuma cena ir daudz zemāka kā analoģiskiem piedāvājumiem, aizdomājieties. Liela cenu starpība var būt saistīta ar slēptiem defektiem vai ar pārdevēja mēģinājumu veikt krāpnieciskas darbības.
Nepērciet preces, kuru cena atšķiras no vidējās cenas uz analoģisku tehniku.
Nepiekrītiet abšaubāmām ķīlām un preces priekšapmaksai. Šaubu gadījumā nebaidieties precizēt detaļas, palūgt papildus fotogrāfijas un dokumentus uz tehniku, pārbaudiet dokumentu autentiskumu, uzdodiet jautājumus.
Pats populārākais krāpniecības veids. Negodīgie pārdevēji var pieprasīt noteiktu avansa summu, lai "rezervēt" jūsu tiesības uz tehnikas pirkumu. Tādā veidā krāpnieki var savākt lielu naudas summu un pazust, bez kontakta iespējām ar viņiem.
- Priekšapmaksas pārskaitījums uz karti
- Neveiciet preikšapmaksu bez dokumentu noformēšanas, kas apstiprina naudas nodošanas procesu, ja komunikācijas laikā jums rodas šaubas par pārdevēju.
- Pārskaitījums uz "pilnvarotas personas" kontu
- Šādam lūgumam ir jārada bažās, visdrīzāk jūs kontaktējaties ar krāpnieku.
- Pārskaitījums uz kompānijas kontu ar līdzīgu nosaukumu.
- Esiet uzmanīgi, krāpnieki var maskēties zem populārām kompānijām, ieviešot nelielas izmaiņas nosaukumā. Nepārskaitiet naudu, ja nosaukums izraisa šaubas.
- Savu rekvizītu ievietošana reāla uzņēmuma rēķinā
- Pirms veikt apmaksu, pārbaudiet, vai norādītie rekvizīti ir korekti un vai tie attiecas uz norādīto uzņēmumu.
Pārdevēja kontakti














struggles with one and perennial weeds resistant to soil herbicides;
destroys the soil crust, loosens the surface of the field, creates a mulching layer on the soil surface to preserve moisture;
improves water permeability and air quality of the soil;
activates microbiological processes in the soil;
fertilizes the soil;
zone robots light, medium, heavy soils;
it is most effective to use a cultivator cultivating immediately after rain;
the depth of processing depends on the timing, phase of crop development and soil moisture.
has a high frame, which allows for inter-row processing at a later date of vegetation;
processes crops of row crops with low and high stems up to 90 cm;
the method of fastening sections with working bodies makes it easy to adapt to different row spacing, row spacing can be adjusted from 45 to 70 cm;
sections with working bodies of the cultivator are equipped with universal lancet paws mounted on a spring vibration stand;
legs and racks are made of steel of high wear resistance, leg width 150 mm;
five working bodies are fixed on one section when adjusting for a row spacing of 600-700 mm or three working bodies when processing a row spacing of 450-500 mm;
each section with working bodies has a support wheel, which makes it possible to copy the surface of the field along the entire width of the processing unit;
a safety spring is installed on each section with working bodies, which ensures the correct clamping force and accurate retention of the depth of tillage;
in the design of sections with working bodies, plain bearings are used that do not require maintenance;
rolling bearings of the support wheels are protected by anthers, which allows to extend their service life;
it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35kg / cm²);
the cultivator is transferred from the working position to the transport one and vice versa by lowering the tractor hitch, in the parking position the cultivator is on supports;
on the design and method of aggregation mounted cultivator;
aggregation with wheeled and tracked tractors from 80 hp;
attendants - 1 person (tractor driver).
has a high frame, which allows for inter-row processing at a later date of vegetation;
processes crops of row crops with low and high stems up to 90 cm;
the method of fastening sections with working bodies makes it easy to adapt to different row spacing, row spacing can be adjusted from 45 to 70 cm;
sections with working bodies of the cultivator are equipped with universal lancet paws mounted on a spring vibration stand;
legs and racks are made of steel of high wear resistance, leg width 150 mm;
five working bodies are fixed on one section when adjusting for a row spacing of 600-700 mm or three working bodies when processing a row spacing of 450-500 mm;
each section with working bodies has a support wheel, which makes it possible to copy the surface of the field along the entire width of the processing unit;
a safety spring is installed on each section with working bodies, which ensures the correct clamping force and accurate retention of the depth of tillage;
in the design of sections with working bodies, plain bearings are used that do not require maintenance;
rolling bearings of the support wheels are protected by anthers, which allows to extend their service life;
it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35kg / cm²);
the cultivator is transferred from the working position to the transport one and vice versa by lowering the tractor hitch, in the parking position the cultivator is on supports;
on the design and method of aggregation mounted cultivator;
aggregation with wheeled and tracked tractors from 80 hp;
attendants - 1 person (tractor driver).
liquid and dry fertilizer application system;
auxiliary guards protecting plant leaves from damage or falling asleep with soil;
finger polyurethane wheels;
skrebniki;
various combinations of paws.
liquid and dry fertilizer application system;
auxiliary guards protecting plant leaves from damage or falling asleep with soil;
finger polyurethane wheels;
skrebniki;
various combinations of paws.
Working speed, km / h ... 3-10
Working width, m ... 8.4
Productivity, ha / h ... 2.5-8.4
Max. processing depth, mm ... 120
Working bodies (for row spacing 700 mm), pcs ... 13
Minimum row spacing, mm ... 450
Maximum row spacing, mm ... 700
The paw is wide, mm ... 150
Transport speed, km / h ... 20
Unit weight, kg ... 1900
Tractor power, not less than hp ... 120
Type ... mounted
Attendants, people ... 1 (tractor operator)